12V LiFePO 4A Charger With LCD Screen
The LiFePO4 chargers are constant current, constant voltage (CCCV) “Smart” chargers for 12V LiFePO, standard, GEL, AGM or lead-acid batteries. “Smart” chargers stop charging once it reaches 14.6V. Then goes into a trickle charge. It’s designed to maximize the life of your lithium battery.
- 12V LiFePO 4A charger works with any of our batteries up to 30 Ah
- Can be used to check the level of charge of your battery without having the AC power cord plugged in.
- 4 in 1 Smart Lithium Charger (Can be used for standard, GEL, AGM or lead-acid batteries with settings)
- Low Temperature mode: When temperature is below -10 the charger can facilitate rapid recovery of the battery capacity
- Ring terminals sized to fit 3/8th inch battery posts.
|Max Charge Voltage||14.6V|
|Max Charge Current||4A|
|AC Inputs||110V 60Hz|
|Dimmensions||8.62″ (L) x 7.25″ (W) x 4.5″ (H)
219mm (L) x 184mm (W) x 114mm (H)
Makes a great Charger for the following:
12 volt 20Ah Battery will fully charge in about 5 hours.
12 volt 30Ah Battery will fully charge in about 7.5 hour.
Faster Charger for the following:
12 volt 9Ah Battery will fully charge in about 2 1/4 hours.
12 volt 12Ah Battery will fully charge in about 3 hours.
This charger can be wired in parallel to provide additional charging current to large battery systems.
This charger is designed for charging individual 12 volt lithium batteries and 12 volt lithium batteries connected in parallel.